-
Masks have a certain filtering effect on the air entering the lungs. To achieve a good filtering effect, the key is the core filter layer! Melt blown cloth is the most important filter material that must be used in disposable protective masks. There are a wide variety of masks on the market, and there are also various grades of meltblown. Consumers can easily buy poor quality meltblown without pay...
read more
-
At present, the main data of melt blown cloth refers to the filtration rate of melt blown cloth, which is mainly divided into 80% particulate matter filtration rate (the following industrial melt blown cloth, the purpose of this melt blown cloth is mainly used for industrial purposes, such as filtration, warmth, isolation, etc. For industrial purposes, this material can also be used to produce dus...
read more
-
The protective effect of non-woven protective masks is based on the effect of adsorbing fine dust (especially dust less than 5 microns). Because dust of this size can directly enter the alveoli, it has the greatest impact on human health. General gauze masks, the dust blocking principle is mechanical filtration, that is, when dust collides with gauze, it passes through layers of barriers to block ...
read more
-
Melt-blown non woven fabric is the core filter material of masks, which is mainly determined by the filtering mechanism of the melt-blown filter material, which is mainly divided into mechanical barrier and electrostatic adsorption. 1. Mechanical barrier Mechanical barrier has the following situations: a. Droplets with a particle size greater than 5um in the air can be blocked by the filter materi...
read more
-
As for non-woven materials, its application is relatively more specific, basically focusing on the personal protection and filtration industry, which can be distinguished by the thickness of the product: ①Thin type: Because of its good waterproof and breathable properties, it is especially suitable for the sanitary market, such as sanitary napkins, sanitary pads, baby diapers, adult incontinence d...
read more
-
In recent years, non-woven fabric manufacturers have sprung up like bamboo shoots after a rain, and almost all regions, counties and cities across the country have built non-woven fabric factories. Although the market and policies are advantageous, the rush of manufacturers will inevitably bring about increasingly severe market competition, and various survival methods such as price wars and raw m...
read more
-
1. Quality judgment of melt blown cloth According to the company's product standards, the quality of the melt blown cloth is judged in terms of physical indicators and appearance quality. 2. Physical index Physical indicators include square meter mass deviation rate, square meter mass coefficient of variation (CV value), transverse and longitudinal breaking strength, transverse and longitudinal br...
read more
-
Melt blown cloth is mainly made of polypropylene, and the fiber diameter can reach 1 to 5 microns. There are many voids, fluffy structure, and good anti-wrinkle ability. These ultra-fine fibers with unique capillary structure increase the number and surface area offibers per unit area, so that the meltblown cloth has good filtration, shielding, heat insulation and oil absorption. . It can be used ...
read more
-
Face masks are generally made of multilayer non-woven fabrics: spunbonded non-woven fabrics or hot rolled non-woven fabrics + meltblown non-woven fabrics + spunbonded non-woven fabrics (SMS structure). The middle M layer meltblown non-woven fabric is a kind of non-woven fabric. The main raw material for the production of melt-blown non-woven fabrics is melt-blown grade PP. Its performance characte...
read more
-
Two-layer masks are very inferior. Medical masks must have three layers. Both sides of medical masks are usually spunbonded non-woven fabrics, and the middle is meltblown fabric. A good meltblown cloth is heavy enough. It looks white rather than transparent. It looks a bit like paper. The thinner the meltblown cloth, the worse the protective effect. The melt blown layer will melt when it encounter...
read more
-
Many melt-blown cloth factories may have encountered this problem: the melt-blown cloth becomes brittle and hard overnight after production. At this time, should we use POE to toughen or use a softener to solve it? The production process of melt blown cloth factory price may become brittle: 1. The melting index of PP1500 meltblown material is higher or lower. The melting index is too high, and the...
read more
-
Both non-woven and meltblown masks have their own advantages, but in terms of protection, meltblown masks are better. The middle layer of the medical mask is a melt-blown non-woven fabric, which can filter bacteria and viruses in the droplets, and is a kind of ultra-fine electrostatic fiber cloth. The role of masks containing meltblown cloth: The main material of medical masks with virus filtering...
read more
ipv6 network supported
