-
As for non-woven materials, its application is relatively more specific, basically focusing on the personal protection and filtration industry, which can be distinguished by the thickness of the product: ①Thin type: Because of its good waterproof and breathable properties, it is especially suitable for the sanitary market, such as sanitary napkins, sanitary pads, baby diapers, adult incontinence d...
read more
-
In recent years, non-woven fabric manufacturers have sprung up like bamboo shoots after a rain, and almost all regions, counties and cities across the country have built non-woven fabric factories. Although the market and policies are advantageous, the rush of manufacturers will inevitably bring about increasingly severe market competition, and various survival methods such as price wars and raw m...
read more
-
Melt blown cloth is mainly made of polypropylene, and the fiber diameter can reach 1 to 5 microns. There are many voids, fluffy structure, and good anti-wrinkle ability. These ultra-fine fibers with unique capillary structure increase the number and surface area offibers per unit area, so that the meltblown cloth has good filtration, shielding, heat insulation and oil absorption. . It can be used ...
read more
-
SMS water repellent non-woven fabric is a composite non-woven fabric, which is a composite product of spunbond and meltblown. It has the advantages of high strength, good filtering performance, non-stickiness and non-toxic. Mainly used in medical and sanitary labor protection products, such as surgical gowns, surgical caps, protective clothing, medical packaging, etc. performance: It is non-toxic,...
read more
-
Face masks are generally made of multilayer non-woven fabrics: spunbonded non-woven fabrics or hot rolled non-woven fabrics + meltblown non-woven fabrics + spunbonded non-woven fabrics (SMS structure). The middle M layer meltblown non-woven fabric is a kind of non-woven fabric. The main raw material for the production of melt-blown non-woven fabrics is melt-blown grade PP. Its performance characte...
read more
-
Two-layer masks are very inferior. Medical masks must have three layers. Both sides of medical masks are usually spunbonded non-woven fabrics, and the middle is meltblown fabric. A good meltblown cloth is heavy enough. It looks white rather than transparent. It looks a bit like paper. The thinner the meltblown cloth, the worse the protective effect. The melt blown layer will melt when it encounter...
read more
-
Many melt-blown cloth factories may have encountered this problem: the melt-blown cloth becomes brittle and hard overnight after production. At this time, should we use POE to toughen or use a softener to solve it? The production process of melt blown cloth factory price may become brittle: 1. The melting index of PP1500 meltblown material is higher or lower. The melting index is too high, and the...
read more
-
Both non-woven and meltblown masks have their own advantages, but in terms of protection, meltblown masks are better. The middle layer of the medical mask is a melt-blown non-woven fabric, which can filter bacteria and viruses in the droplets, and is a kind of ultra-fine electrostatic fiber cloth. The role of masks containing meltblown cloth: The main material of medical masks with virus filtering...
read more
-
We know that melt blown cloth is the core material on protective equipment such as masks and plays a major filtering role. In order to achieve effective filtration, the melt blown cloth needs electrostatic electret treatment, in which case droplets etc. will be adsorbed on the melt blown cloth. So if there is static electricity on the meltblown cloth, will it exist for a long time, or is it said t...
read more
-
There are 32 flow and 85 flow in the melt blown cloth detection parameters. What does this parameter mean? The quality of melt blown cloth mainly depends on the particle filtration and bacterial filtration efficiency. The specific filtration efficiency of melt blown cloth needs to be tested with a melt blown cloth testing instrument. The specific process will not be introduced in detail, but I wil...
read more
-
This question is the most frequently asked by mask manufacturers. We have compiled the information and discussed with you what is meltblown electret treatment. Electret refers to a dielectric material with long-term charge storage function. It has the advantages of high efficiency, low flow resistance, antibacterial, and energy saving. On the basis of ensuring the physical collision blocking effec...
read more
-
Sofa non-woven fabrics are mainly PP spunbonded non-woven fabrics, which are made of polypropylene as the main raw material and are composed of fine fibers. The finished product is soft and moderately soft and comfortable through point hot melt bonding. High-strength, chemical-resistant, anti-static, waterproof, breathable, antibacterial, non-toxic, non-irritating, non-mold, and can isolate the pr...
read more