-
Needle punched non-woven products are formed by fine carding, repeated precision needle punching or appropriate hot rolling treatment. Through the coordination of different production processes and the matching of different materials, there are currently hundreds of different products on the market, including: geotextiles, geomembranes, velvet cloth, speaker blankets, electric blanket cotton, embr...
read more
-
Geotextile is one of PET non woven fabric.The production raw material of filament geotextile is polyester chips, and the shape is granular, while the production raw material of short filament geotextile is polyester fiber. Filament geotextiles are higher than short filament geotextiles in terms of breaking strength and other physical indicators. The price of filament geotextiles with the same weig...
read more
-
Meltblown cloth is the key material of masks. Meltblown cloth mainly uses polypropylene as the main raw material. Different countries have different standards of the meltblown,and testing method. As key filter material of mask, our meltblown can reach the standard as below: **3-ply surgical mask: European standard: EN 14683 type I / type II / type IIR; American standard: ASTM F2100 level 1/ l...
read more
-
According to reports, 20.47% of users will pay great attention to the breathability of diaper hot air cotton when purchasing baby diapers. The sweat glands of the baby's skin have very small sweat holes, and the skin temperature is not well controlled. For example, the permeability of the diaper is not good. After the urine is absorbed, the heat and moisture are gathered on the diaper, which is ea...
read more
-
Usually non woven fabric which use in the infant diaper is PP spunbond , SMS spunbond and hot air non woven fabric. Fabrics:SSS 10-13gsm, SMMS:11-15gsm. Material requirements:SSS, Soft, tenuous fiber, uniformed appearance, good tensile in crosswise. SMMS,SSMMS:hydrophobic, goodbreathability, soft, good tensile in crosswise. If you are interested in the infant diaper non woven fabric, please contac...
read more
-
To maintain the working efficiency of the melt-blowout machine and reduce the resistance of the melt-blowout cloth as far as possible has become a new issue to be solved by the melt-blowout cloth factory. For example, for a 25g meltblown cloth, single-layer resistance can be controlled below 60pa at a flow rate of 85L/min, double-layer resistance can be controlled below 120pa, single-layer resista...
read more